The cleanliness of the cylinder washer is ideal

2023-08-31

Cylinder cleaning machine is a kind of cleaning equipment specially designed for the cylinder block, it can quickly and effectively clear the coal slime, dust, dirt, etc. accumulated inside and outside the cylinder block, and also can play multiple functions such as rust removal and polishing. Although the use of the cylinder cleaning machine is simple, it is after all a professional equipment, so it is necessary to carry out reasonable installation and debugging, and then operate in the correct way to ensure that the powerful function of the cylinder cleaning machine is fully played, so that the cylinder body can achieve the ideal degree of cleaning.

When installing the cylinder cleaning machine, first pay attention to the rotation direction of the motor, which should be kept clockwise; At the same time, the ground wire should be connected to it. After the cylinder body cleaning machine starts normally, the empty machine runs for a few minutes and then works normally. When used in winter, it must be preheated for 12-24 hours and then added water to debug.

When using the cylinder cleaning machine, it is necessary to keep in mind that the first point test, and then empty operation for 2-3 minutes and check the movement of the transmission system and the transport belt to maintain a stable state, and confirm that everything is normal before production. Not only that, but also always pay attention to the running state of the cylinder cleaning machine.

After work, the cleaned cylinder block can not be parked on the transport vehicle, press the stop button to stop the whole machine. In addition, the cleaning fluid in the cylinder cleaning machine should be regularly added with water and a certain proportion of dirt cleaning agent to supplement consumption, so that the liquid level is maintained at a certain height.