How to improve the cleaning efficiency of ultrasonic cleaning machine?

2023-08-31

The high-frequency oscillation signal issued by the ultrasonic generator is converted into high-frequency mechanical oscillation by the transducer and transmitted to the medium - cleaning solvent, and the forward radiation of the ultrasonic wave in the cleaning liquid is dense and dense, so that the liquid flows and produces tens of thousands of tiny bubbles with a diameter of 50-500μm. Tiny bubbles present in the liquid vibrate under the action of a sound field.

Ultrasonic cleaning machine maintenance
1. Do not splash conductive liquid (such as water) from the air inlet at the top of the control cabinet of the ultrasonic cleaning machine. Otherwise, it will cause serious damage to the line system of the cleaning machine.
2. Pay attention to keep the ultrasonic cleaning machine clean, and turn off the power when not in use.
3. Avoid collision or violent vibration of the ultrasonic cleaning machine.
4. Remove from heat.
5. The ultrasonic cleaning machine should be avoided in a humid environment.
6. The continuous working time of the ultrasonic cleaning machine shall not exceed 4 hours. If the continuous working time is too long, the ultrasonic adjustment knob should be rotated to "0" bit, and the cooling fan should continue to work, and the ultrasonic cleaning does not start the state of continuous heat dissipation in the ultrasonic control cabinet for at least 2 minutes.
7. After a long time of operation, the cleaning machine should first adjust the power knob to zero before stopping, and shut down after using its fan for 3-6 minutes to ensure that the internal heat of the power supply is dissipated.
8. The cleaning solution should be precipitated, filtered or replaced in time to ensure the cleaning effect.
In order to make the system cleaning machine work normally for a long time, in addition to avoiding non-standard operation, it is necessary to regularly maintain and maintain the cleaning machine, and do the following aspects of work:
① Regularly clean the contaminated cleaning liquid of the oil storage tank.
② Let the oil pump run once regularly, at least 10mmin each time.
③ After the cleaning machine is used, cover it with a cover and do a good job of dustproof and moisture-proof.